PD800 OEM Parking Assist System

PD400
PD800

PD800
Front & Rear 8 digital sensor OEM system

8-sensor (4 front, 4 rear) parking assist system with digital sensors. Two hideaway buzzers provide audible prompts. Organized cabling in loom provides for easy installation.

OEM front and rear digital sensor system with audible warning The 8 sensor system includes 4 additional sensors in the front of the vehicle that are designed to aid when pulling into or out of tight spaces. While in reverse, the two center sensors remain off and the two outside sensors monitor the corners of the vehicle so that when the vehicle is turning into our out of a space, the driver knows how much room they have between the vehicle and any obstruction. While pulling forward, the two outside sensors operate the same as during reversing, while the two center sensors begin alerting the driver when the vehicle is pulled within 3 feet of an obstruction. This allows the vehicle to be pulled as far as possible into a parking space without contacting the vehicle, wall, light pole, etc. which may be straight ahead. The specially tuned 3' range of the front sensors provides excellent protection while parking, without distracting beeps that would occur while driving if the range was any longer.
Self-test function, damaged sensor indication
Accurate detection digital sensors Steelmate's digital sensors provide the fastest and most accurate distance to object readings. Through the use of sophisticated DSP software, the Steelmate system can more precisely interpret sensor data and make corrections for non-obstruction related feedback. The end result allows Steelmate to deliver the best possible backup safety performance.
Intelligent detection, for cars with tow-bar, spare tire, or other protrusion
Anti-interference and anti-false alert technology This Steelmate system uses a proprietary digital sensing technology that uses real-time feedback and sophisticated DSP to provide the fastest and most accurate object detection possible.
Perfect performance under heavy rain, windy, and dusty environments
Detachable sensor with waterproof wire connector
Organized wires in one loom for easy installation
Suitable for plastic and metal bumpers
All weather design (-40C~ +85C) This unit is designed to work in even the most extreme weather conditions.

Hover over features with yellow bullets for additonal information!